Host-Level Client-Side API

As opposed to the Connection-Level Client-Side API the host-level API relieves you from manually managing individual HTTP connections. It autonomously manages a configurable pool of connections to one particular target endpoint (i.e. host/port combination).

Requesting a Host Connection Pool

The best way to get a hold of a connection pool to a given target endpoint is the Http().cachedHostConnectionPool(...)Http.get(system).cachedHostConnectionPool(...) method, which returns a FlowFlow that can be “baked” into an application-level stream setup. This flow is also called a “pool client flow”.

The connection pool underlying a pool client flow is cached. For every ActorSystemActorSystem, target endpoint and pool configuration there will never be more than a single pool live at any time.

Also, the HTTP layer transparently manages idle shutdown and restarting of connection pools as configured. The client flow instances therefore remain valid throughout the lifetime of the application, i.e. they can be materialized as often as required and the time between individual materialization is of no importance.

When you request a pool client flow with Http().cachedHostConnectionPool(...)Http.get(system).cachedHostConnectionPool(...), Apache Pekko HTTP will immediately start the pool, even before the first client flow materialization. However, this running pool will not actually open the first connection to the target endpoint until the first request has arrived.

Configuring a Host Connection Pool

Apart from the connection-level config settings and socket options there are a number of settings that allow you to influence the behavior of the connection pool logic itself. Check out the pekko.http.host-connection-pool section of the Apache Pekko HTTP Configuration for more information about which settings are available and what they mean.

Note that, if you request pools with different configurations for the same target host you will get independent pools. This means that, in total, your application might open more concurrent HTTP connections to the target endpoint than any of the individual pool’s max-connections settings allow!

There is one setting that likely deserves a bit deeper explanation: max-open-requests. This setting limits the maximum number of requests that can be in-flight at any time for a single connection pool. If an application calls Http().cachedHostConnectionPool(...)Http.get(system).cachedHostConnectionPool(...) 3 times (with the same endpoint and settings) it will get back 3 different client flow instances for the same pool. If each of these client flows is then materialized 4 times (concurrently) the application will have 12 concurrently running client flow materializations. All of these share the resources of the single pool.

This means that no more than 12 requests can be open at any time.

The max-open-requests config setting allows for applying a hard limit which serves mainly as a protection against erroneous connection pool use, e.g. because the application is materializing too many client flows that all compete for the same pooled connections.

Using a Host Connection Pool

The “pool client flow” returned by Http().cachedHostConnectionPool(...)Http.get(system).cachedHostConnectionPool(...) has the following type:

Flow[(HttpRequest, T), (Try[HttpResponse], T), HostConnectionPool]

Flow<Pair<HttpRequest, T>, Pair<Try<HttpResponse>, T>, HostConnectionPool>

This means it consumes pairs of type (HttpRequest, T)Pair[HttpRequest, T]Pair<HttpRequest, T> and produces pairs of type (Try[HttpResponse], T)Pair<Try<HttpResponse>, T> which might appear more complicated than necessary on first sight. The reason why the pool API includes objects of custom type T on both ends lies in the fact that the underlying transport usually comprises more than a single connection and as such the pool client flow often generates responses in an order that doesn’t directly match the consumed requests. We could have built the pool logic in a way that reorders responses according to their requests before dispatching them to the application, but this would have meant that a single slow response could block the delivery of potentially many responses that would otherwise be ready for consumption by the application.

In order to prevent unnecessary head-of-line blocking the pool client-flow is allowed to dispatch responses as soon as they arrive, independently of the request order. Of course this means that there needs to be another way to associate a response with its respective request. The way that this is done is by allowing the application to pass along a custom “context” object with the request, which is then passed back to the application with the respective response. This context object of type T is completely opaque to Apache Pekko HTTP, i.e. you can pick whatever works best for your particular application scenario.

Connection Allocation Logic

This is how Apache Pekko HTTP allocates incoming requests to the available connection “slots”:

1. If there is a connection alive and currently idle then schedule the request across this connection.
2. If no connection is idle and there is still an unconnected slot then establish a new connection.
3. If all connections are already established and “loaded” with other requests then pick the connection with the least open requests that only has requests with idempotent methods scheduled to it, if there is one.
4. Otherwise apply back-pressure to the request source, i.e. stop accepting new requests.

Retrying a Request

If the max-retries pool config setting is greater than zero the pool retries idempotent requests for which a response could not be successfully retrieved. Idempotent requests are those whose HTTP method is defined to be idempotent by the HTTP spec, which are all the ones currently modelled by Apache Pekko HTTP except for the POST, PATCH and CONNECT methods.

When a response could not be received for a certain request there are essentially three possible error scenarios:

1. The request got lost on the way to the server.
2. The server experiences a problem while processing the request.
3. The response from the server got lost on the way back.

Since the host connector cannot know which one of these possible reasons caused the problem and therefore PATCH and POST requests could have already triggered a non-idempotent action on the server these requests cannot be retried.

In these cases, as well as when all retries have not yielded a proper response, the pool produces a failed Try (i.e. a scala.util.Failure) together with the custom request context.

If a request fails during connecting to the server, for example, because the DNS name cannot be resolved or the server is currently unavailable, retries are attempted with exponential backoff delay. See the documentation of the pekko.http.host-connection-pool.base-connection-backoff setting in the configuration.

Pool Shutdown

Completing a pool client flow will simply detach the flow from the pool. The connection pool itself will continue to run as it may be serving other client flows concurrently or in the future. Only after the configured idle-timeout for the pool has expired will Apache Pekko HTTP automatically terminate the pool and free all its resources.

If a new client flow is requested with Http().cachedHostConnectionPool(...)Http.get(system).cachedHostConnectionPool(...) or if an already existing client flow is re-materialized the respective pool is automatically and transparently restarted.

In addition to the automatic shutdown via the configured idle timeouts it’s also possible to trigger the immediate shutdown of a specific pool by calling shutdown() on the HostConnectionPool instance that the pool client flow materializes into. This shutdown() call produces a Future[Unit]CompletionStage<Done> which is fulfilled when the pool termination has been completed.

It’s also possible to trigger the immediate termination of all connection pools in the ActorSystemActorSystem at the same time by calling Http().shutdownAllConnectionPools()Http.get(system).shutdownAllConnectionPools(). This call too produces a Future[Unit]CompletionStage<Done> which is fulfilled when all pools have terminated.

Http().addClientPoolsToCoordinatedShutdown()Http.get(system).addClientPoolsToCoordinatedShutdown() will add the client connection pool shutdown to Apache Pekko’s coordinated shutdown so it will be called before the actor system disappears.

Examples

copysourceimport org.apache.pekko
import pekko.actor.ActorSystem
import pekko.http.scaladsl.Http
import pekko.http.scaladsl.model._
import pekko.stream.scaladsl._
import pekko.stream.QueueOfferResult

import scala.concurrent.{ Future, Promise }
import scala.util.{ Failure, Success }

implicit val system: ActorSystem = ActorSystem() // to get an implicit ExecutionContext into scope

val QueueSize = 10

// This idea came initially from this blog post (link broken):
// http://kazuhiro.github.io/scala/akka/akka-http/akka-streams/2016/01/31/connection-pooling-with-akka-http-and-source-queue.html
val poolClientFlow = Http().cachedHostConnectionPool[Promise[HttpResponse]]("pekko.apache.org")
val queue =
  Source.queue[(HttpRequest, Promise[HttpResponse])](QueueSize)
    .via(poolClientFlow)
    .to(Sink.foreach {
      case ((Success(resp), p)) => p.success(resp)
      case ((Failure(e), p))    => p.failure(e)
    })
    .run()

def queueRequest(request: HttpRequest): Future[HttpResponse] = {
  val responsePromise = Promise[HttpResponse]()
  queue.offer(request -> responsePromise) match {
    case QueueOfferResult.Enqueued    => responsePromise.future
    case QueueOfferResult.Dropped     => Future.failed(new RuntimeException("Queue overflowed. Try again later."))
    case QueueOfferResult.Failure(ex) => Future.failed(ex)
    case QueueOfferResult.QueueClosed => Future.failed(
        new RuntimeException("Queue was closed (pool shut down) while running the request."))
  }
}

val responseFuture: Future[HttpResponse] = queueRequest(HttpRequest(uri = "/"))

copysourceimport org.apache.pekko
import pekko.NotUsed
import pekko.actor.ActorSystem
import pekko.http.scaladsl.Http
import pekko.http.scaladsl.marshalling.Marshal
import pekko.http.scaladsl.model._
import pekko.http.scaladsl.model.Multipart.FormData
import pekko.stream.scaladsl._

import java.nio.file.{ Path, Paths }
import scala.concurrent.Future
import scala.util.{ Failure, Success }

implicit val system: ActorSystem = ActorSystem()
import system.dispatcher // to get an implicit ExecutionContext into scope

case class FileToUpload(name: String, location: Path)

def filesToUpload(): Source[FileToUpload, NotUsed] =
  // This could even be a lazy/infinite stream. For this example we have a finite one:
  Source(List(
    FileToUpload("foo.txt", Paths.get("./foo.txt")),
    FileToUpload("bar.txt", Paths.get("./bar.txt")),
    FileToUpload("baz.txt", Paths.get("./baz.txt"))))

val poolClientFlow =
  Http().cachedHostConnectionPool[FileToUpload]("pekko.apache.org")

def createUploadRequest(fileToUpload: FileToUpload): Future[(HttpRequest, FileToUpload)] = {
  val bodyPart =
    // fromPath will use FileIO.fromPath to stream the data from the file directly
    FormData.BodyPart.fromPath(fileToUpload.name, ContentTypes.`application/octet-stream`, fileToUpload.location)

  val body = FormData(bodyPart) // only one file per upload
  Marshal(body).to[RequestEntity].map { entity => // use marshalling to create multipart/formdata entity
    // build the request and annotate it with the original metadata
    HttpRequest(method = HttpMethods.POST, uri = "http://example.com/uploader", entity = entity) -> fileToUpload
  }
}

// you need to supply the list of files to upload as a Source[...]
filesToUpload()
  // The stream will "pull out" these requests when capacity is available.
  // When that is the case we create one request concurrently
  // (the pipeline will still allow multiple requests running at the same time)
  .mapAsync(1)(createUploadRequest)
  // then dispatch the request to the connection pool
  .via(poolClientFlow)
  // report each response
  // Note: responses will not come in in the same order as requests. The requests will be run on one of the
  // multiple pooled connections and may thus "overtake" each other.
  .runForeach {
    case (Success(response), fileToUpload) =>
      // TODO: also check for response status code
      println(s"Result for file: $fileToUpload was successful: $response")
      response.discardEntityBytes() // don't forget this
    case (Failure(ex), fileToUpload) =>
      println(s"Uploading file $fileToUpload failed with $ex")
  }